BuddyRider bike seat for dogs
With BuddyRider, your dog sits in a comfortable, secured position between your bike’s seat and handlebars – making the riding experience more enjoyable for both buddy and rider with our dog bike carrier!
Setting up your BuddyRider
1. Check all parts are included.
2. Raise the front platform and secure the center support arm with the blue screw and one of the washers. Do not over-tighten.
3. Attach the collar to the 4 tie-down straps as shown. Clips will be in front and behind the neck and connected to the BuddyRider via the straps on the sides. Leave the collar unclipped for now.
4. Get your buddy comfortable in the seat while it is on the ground. Try treats to entice them to sit in the BuddyRider if they hesitate to get in. Make sure that they fit in comfortably. Adjust the collar width to the size of your dog’s neck and ensure that it clips in safely and securely.
5. Attach the receiver to your bicycle seat post with the open end facing up. At least 4cm (1.75”) of the post must be exposed. Position the receiver as high up the seat post as possible to maximize legroom while pedaling.
6. Insert metal support arm with the flat plate facing up into the receiver. Secure with the quick release pin and R-clip as shown.
7. Position the seat on the arm as far forward as possible without interfering with your handlebars or steering post. Mark this position on the bar with a pencil behind the pet seat. Remove the pet seat and then remove the metal support arm from the bike using the quick release pin.
8. Position the pet seat as close to the pencil mark as possible while lining up the holes. Using the four red screws and washers provided, mount the pet seat to the metal bar. Make sure all four screws are in position before tightening. Do not over-tighten.
9. Install the assembled pet seat to the bicycle using the quick release pin and secure with the R-clip provided.
10. With the collar attached to the BuddyRider, place your pet in the seat, connect the two clips to secure your as needed.
11. Before your first ride, place your buddy in the seat while it is attached to your bike and try walking around. Praise your pet and reward them with a treat.
12. You’re ready to ride! Hop on your bike and ride slowly for short distances working your way up to longer rides once your buddy is used to their BuddyRider. Before your ride every time double check that your screws are fastened tightly.
